XZ-C Cable Resonance Test System
The device is mainly for AC voltage test of XLPE cable, hydraulic generator, power transformer, busbar and GIS.
Description
The device is mainly for AC voltage test of XLPE cable, hydraulic generator, power transformer, busbar and GIS. It has wide application scope. It is an ideal withstand voltage device for high voltage test department and power installation and repair engineering unit.
The device is mainly composed of frequency power source, excitation transformer, reactor, capacitor voltage divider, compensation capacitor (optional).
Resonant test system is used in power, metallurgy, petroleum, chemical industry and other industries. It is suitable for the transfer and preventive test of capacitive test products with large capacity and high voltage. The frequency series resonant test device is mainly aimed at 6kV-500kV power transformer, GIS, switch, busbar, bushing, transformer and other capacitive equipment, 6kV-220kV high voltage cable, 20kV and electric motor / generator , and 35kV, 66kV, 110kV, 220kV, 330kV, 500K. V voltage class CVT boost test.
Product characteristics
1. 35kV and below cable used more the test work is large so this kind of voltage test device is small light in weight portable cable voltage test system is born from this.
2. The system requires a single person to carry no more than 30kg on site two people not more than 60kg suitable for on-site handling;
3. The power supply uses 220V single-phase or 380V single to facilitate on-site power collection.
4. The reactor is made of dry epoxy casting which is beautiful and reliable and is suitable for all kinds of cables.
5. 110kV and above voltage grade cable withstand voltage test adopts oil immersed reactor. When the single reactor weight is more than 100kg it can be equipped with our own special small electric crane.
Product parameters
1.Rated output voltage: 0~220 kV (RMS).
2.The output frequency: 30 ~ 300Hz.
3.Resonant voltage waveform: sine wave waveform distortion rate is less than 1% .
4.Full load working time: continuous working time 60mins.
5.System quality factor: maximum load is more than 20.
6.Frequency adjustment fineness: 0.1Hz instability< 0.01%.
7.Work power: 220V or 380V single phase.
Packing List
| No. | Product name | Unit | QTY |
| 1 | Power source | set | 1 |
| 2 | Excitation transformer | set | 1 |
| 3 | HV reactor | set | As specifications. |
| 4 | Capacitive divider | set | 1 |
| 5 | Compensation capacitor | set | 1 |
| 6 | Test wires | set | 1 |
| 7 | Inspection report | set | 1 |
| 8 | Instruction manual | set | 1 |
| 9 | Certificate | set | 1 |
| 10 | Packing list | set | 1 |
Hot Tags: XZ-C Cable Resonance Test System, China XZ-C Cable Resonance Test System manufacturers, suppliers, factory
Send Inquiry
You Might Also Like
