ET-3000 Earth Resistance Meter
Good grounding system is an important guarantee of safe and reliable operation of electric power telecommunications and electrical equipment.
Description
Good grounding system is an important guarantee of safe and reliable operation of electric power telecommunications and electrical equipment. The quality of earth resistance is judged by its size. Finding an accurate fast simple and reliable method to measure earth resistance has become urgent in lightning protection and grounding field. ET-3000 Multifunction Dual-Clamp Earth Resistance Tester can be applied to post and telecommunications power industry meteorology equipment room power distribution wire tower transmission line gas station factory grounding grid lightning rod and so on.
The instrument not only can adopt the traditional auxiliary ground electrode method to measure the earth resistance but also can measure the earth resistance without auxiliary ground electrode which change the traditional measurement principle and method of earth resistance: the use of double jaws non-contact measurement technology without auxiliary ground electrode and isolating grounding body and load to achieve the on-line measurement. In the single-point earth system and strong interference conditions it is recommended that using auxiliary ground electrode to measure the resistance.
Product characteristics
1. Double clamp / ground piles measurement method: Can be applied to any place to measure whether multi-point or single point grounding.
2. Strong anti-interference ability: Self-generating high-frequency current can filter 50Hz and 100Hz harmonic interference current even in the 500KV substation environment it can accurately measure.
3. Wide measurement range and high resolution: Range from 0.01Ω ~ 200Ω resolution 0.01Ω the ground resistance under 0.7Ω also can be accurately measured.
4. Large jaw design：Jaw diameter is 50mm (standard configuration) which meets the case using flat iron / steel wire grounding special jaw size can be customized.
5. High-capacity data storage：It can store 200 sets of measurement datum.
6. Simple operation single-operator：Small size light weight explosion-proof carrying case is easy for field measurements.
Product Parameters
1. Measurement range: Double clamp method: 0.01Ω ~ 200Ω Ground piles method: 0.01Ω ~ 200Ω
2. Accuracy: Double-clamp method: ± 3% ± 2 digitals Ground piles method: ± 2% ± 2 digitals
3. Minimum resolution: 0.01Ω
4. Jaw size: Φ50mm
5. Storage capacity: 200 groups of datum
6. Working temperature: 0 º C ~ + 50 ° C
7. Power supply: 8 AA NiMH rechargeable batteries or regular AA batteries
8. Weight: 0.8kg (battery included)
9. Dimensions: 265 × 130 × 65 mm
| No. | Name | QTY |
| 1 | Host | 1 |
| 2 | Testing line | 1 |
| 3 | Test clamp | 1 |
| 4 | Charger | 1 |
| 5 | Fuse (0.1A) | 4 |
| 6 | Inspection report | 1 |
| 7 | Instruction manual | 1 |
| 8 | Certificate | 1 |
| 9 | Warranty card | 1 |
Hot Tags: ET-3000 Earth Resistance Meter, China ET-3000 Earth Resistance Meter manufacturers, suppliers, factory, Earth Resistance Meter, Et 3000 Earth Resistance Meter, Et 1000 Dc System Earth Fault Detector
Send Inquiry
You Might Also Like
