TAG-8600 Wireless Hv Phasing Detector
TAG-8600 High Voltage Phasing Detector，for MV overhead distribution circuit ，used for detection of high-voltage power grid closing point on both sides of the phase sequence is the same.
Description
TAG-8600 High Voltage Phasing Detector，for MV overhead distribution circuit ，used for detection of high-voltage power grid closing point on both sides of the phase sequence is the same. Two power line connection before must check phase sequence, or line may be short circuit. The instrument suitable for 6KV ~ 220KV power transmission line, and can test whether line charged. The Instrument adopts the wireless transmission technology, safe and reliable operation, easy to use.
Product characteristics
1. Insulating rod before using should be voltage withstand test.
2. The standard configuration insulating rod length is 3 m, corresponding voltage for ≤ 220 KV. If the measurement circuit voltage higher than 220KV, please use the length of more than 3 meters of the insulating rod.
3. Operation hand position not more than insulating rod handle position.
Technique Parameters
1. Accuracy: when phase sequence is same: the error≤ 5 °.
2. The frequency accuracy：±0.1HZ.
3. Measuring voltage range is 6KV - 220KV .
4. The transmitter and the receiving host transmission distance is 100 meters.
5. Results (in phase, interphase) using A standard, phase difference acuity ≥30 ° for out phase, the phase difference < 30 ° are in phase.
6. Human voice prompt, male voice "in phase", female voice "phase-out".
7. Screen shows two lines at the same time of phase difference, frequency, waveform and the vector diagram.
8. The host shows battery, half an hour without automatic shutdown operation.
9. Two emitter and receiver use rechargeable lithium battery.
10. Have high pressure test report and the function of the phase sequence.
11. High pressure when measuring the leakage current < 10 uA.
12. Transmitter power consumption < 0.1 W, receiving host work power consumption < 0.3 W.
13. Host lithium battery capacity is about 2200 mAH, transmitter battery capacity is about 350 mAH.
14. 1Working environment: temperature - 35 ℃ ----- + 45 ℃ ; humidity ≤ 95% RH.
15. .Storage conditions: temperature - 40 ℃ ------ + 55 ℃ ; humidity ≤95% RH.
16. The weight：about 3.6KG.
17. Instrument package size: 56 cm * 26 cm * 13 cm.
| No. | Description | Qty. |
| 1 | Plastic case | 1 |
| 2 | The receiving host | 1 |
| 3 | Emitter | 2 （X Y emitter each one） |
| 4 | Telescopic insulating rod（3m） | 2 |
| 5 | The charger | 2 |
| 6 | Pointed terminal | 2 |
| 7 | Test line | 2 |
| 8 | Manual | 1 |
| 9 | Inspection report | 1 |
| 10 | Certificate | 1 |
Hot Tags: TAG-8600 Wireless Hv Phasing Detector, China TAG-8600 Wireless Hv Phasing Detector manufacturers, suppliers, factory, Smg 2000 Digital Phase Meter, Tag 8000 Hv Phase Tester, Smg 3000 Three Phase Meter
Send Inquiry
You Might Also Like
